This is the Futaba 6EXA Super 6 channel FM Computer Radio System.
This system is designed for the first time airplane modeler
who prefers a computer style radio.
***This radio has PCM Capabilities***
***THIS RADIO CONTAINS NO HELI PROGRAMMING***

Here are the differences between the 6EXA and 6EXAS:

1. The front panel is manufactured differently.
2. The LCD is different.
3. You can name your models up to 4 characters.
4. It has aileron differential.
5. It has flap trim.
6. It has adjustable mixing rates on V-Tail and elevon.
7. It has adjustable mixing positions for throttle cut.
8. It can be switched from FM to PCM.
9. It has failsafe in PCM mode only.

This radio is diode protected to prevent overcharging, which means the
battery cannot be discharged through the transmitter.

FEATURES: Six model memory with four character model naming
PCM/PPM selectable
Standard programming features include all channel servo reversing,
End point adjustment (EPA) on all channels, dual rates, exponential
flaperon, V-tail, elevon, and wing type selection
Transmitter controls include Throttle Cut Switch-stops engine
when flipped twice within one second, Trainer Switch-controls link
between instructor and student transmitters, Retract Switch-
controls operation of retractable landing gear or other feature,
Dual Rate Switch-reduces servo travel and switches' exponential
curve
Flap dial control allows fine tuning of flap servo to slow airplane
when coming in for a landing
Adjustable flaperon rates
Adjustable stick length
Trainer box capable (trainer cord sold separately, see COMMENTS).

INCLUDES: One Futaba 6EXA Super Computer Radio system with transmitter and
receiver crystals
R168DF FM Dual Conversion Receiver FUTL0832
NR-4J Receiver battery FUTM1280
NT8F600B Transmitter battery FUTM1440
FBC-19B (4) Charger FUTM1830
SWH-13 Switch Harness FUTM4370
ANT-5 Transmitter Antenna FUTM5040
Servo Extension FUTM3910

REQUIRES: Charging transmitter and receiver batteries

SPECS: Transmitter
Modulation: FM (PPM) and PCM 1024
Power Supply: 9.6V NT8S600B NiCd battery or 12V alkaline battery
Current Drain: 250mA
Receiver-
Type: Dual conversion
Power requirement: 4.8V or 6V NiCd battery
Dimensions: 1.1 x 2.2 x 0.8" (28.5 x 55.5 x 19.8mm)
Weight: 1.0oz (28g

COMMENTS: If using as a trainer radio, one of the following trainer cords will
be needed;
9C to FM FUTM4420 trainer cord to connect to standard trainer port
9C to 9C FUTM4415 trainer cord when using a 9C or another 6EXA